A traditional built-in vacuum removes the need to carry a portable vacuum motor, but homeowners still have to store and carry a long hose. Hide-A-Hose addresses that inconvenience by storing the hose within specially designed vacuum tubing.
How Hide-A-Hose Works
Pull out only the hose you need
A purpose-built inlet allows you to extend a hose to reach a room or cleaning area. The system is planned around hose lengths, inlet positions, and the available space inside the building.
Clean and retract
Once cleaning is finished, the hose is returned into the tubing using system airflow and the prescribed procedure. Effective retraction depends on the correct installation, hose condition, and adequate suction.
Why this matters in everyday use
The real benefit is convenience. You can clean a small spill or tackle an entire room without getting a separate long hose out of storage every time.
Planning a Hide-A-Hose Installation
New construction
Before walls are closed, routing, sweep fittings, electrical controls, and inlet positions can be incorporated into the overall central vacuum design.
Existing homes
Some finished homes can be retrofitted, but the feasibility depends on framing, attic or crawl-space access, the chosen inlet locations, and the route needed for the larger-radius tubing.
System compatibility
A retractable hose needs properly planned airflow and compatible piping. Having an existing central vacuum does not automatically mean every inlet can become a retractable inlet without changes.
Hide-A-Hose Service and Maintenance
Hose does not retract well
Possible causes include an obstruction, inadequate airflow, hose wear, poor routing, or an issue at the inlet. Confirm the power unit and filters are in good condition before assuming the hose itself has failed.
Cleaning and care
Follow the manufacturer’s recommendations for the hose and inlet. Avoid forcing objects into the system or trying improvised methods that could damage tubing or electrical controls.
Is Hide-A-Hose a Good Fit for Your Home?
A conversation before choosing equipment
A useful consultation considers home size, flooring, desired cleaning areas, existing central vacuum equipment, and how convenient the hose location will be for everyday use.
Need help in Greater Augusta? Call to discuss your model, symptoms, or installation goals.
Call (762) 444-2042Watch the Hose Retract
Watch the product demonstration, then call to discuss whether the system can be planned into your home.
Ask About Hide-A-Hose →Frequently Asked Questions
Can I add Hide-A-Hose to an existing home?
Sometimes. Retrofit feasibility depends on access for specialized tubing and the layout of the home.
Does Hide-A-Hose replace the central vacuum power unit?
No. It is a hose-management approach that works as part of a compatible central vacuum system.
Why is the hose not retracting?
Obstructions, inadequate airflow, hose condition, and piping design can affect retraction. Diagnosis should begin with the system as a whole.
Do I need a separate inlet in every room?
Not necessarily. Inlet placement is planned around hose reach, room layout, and convenient coverage.